Featured Brand: Amada :: Clausing Kalamazoo :: Cosen :: DoAll :: Hyd-Mech
www.amadabandsaw.com
 In addition to the principal requirements of cutting accuracy and speed, the most important factors involved in the development of bandsaws these days are productivity, production control, labor saving and environmentally friendly measures. Amada is proud to be pioneering the field of bandsaw and blade production.
^ Back to Top ^
www.clausing-industrial.com
 Clausing Industrial, Inc. is your ONE STOP SHOP for Quality Kalamazoo Horizontal, Circular (Cold), and Vertical Bandsaws. They offer a complete line of ruggedly built manual, semi-automatic and fully automatic models.
KALAMAZOO
HORIZONTAL BAND SAWS |
|
| |
|
| Manual Saws |
CUTTING CAPACITY |
| HBS-1018 |
10" |
| HB-280 |
11" |
| HB280SA |
11" |
| HB330SA |
13" |
| |
|
| Semi-Automatic Saws |
CUTTING CAPACITY |
| BS400SA, BS450SA, BS760SA |
15", 18", 18" |
| BS250HAS, BS300HAS |
10", 13" |
| |
|
| Automatic Saws |
CUTTING CAPACITY |
| KC12AX |
12" |
| BS400HAS, BS450HAS |
15", 18" |
| |
|
| Automatic Saws with NC Control |
CUTTING CAPACITY |
| BS300GA, BS400GA, BS450GA |
13", 15", 18" |
^ Back to Top ^
www.cosen.com
 Since its establishment in 1976, Cosen has continued its growth into one of the world’s largest professional band saw manufacturers. Today’s Cosen manufactures over 100 models including manual band saws, semi-automatic band saws, automatic band saws, and NC band saws from capacities of 200mm (8") to 2000mm (78"). Cosen has the right band saw to satisfy your metal cutting and production volume requirements.
^ Back to Top ^
www.doallsawing.com
 Whether your needs are for a sawing machine to handle high production cut off work in metal service centers or manufacturing plants, or for occasional use in the maintenance department or toolroom, there’s a DoAll saw that will meet your specific requirement. Their wide range of sawing machines include general purpose saws, vertical contour saws, miter cutting saws, and production power saws with capacities up to 32-in. diameter.
| GENERAL PURPOSE |
|
| |
CUTTING CAPACITY |
| C-916M |
rectangle 9"H x 16"W (230 x 405mm), round 10-3/4" (273 mm) |
| C-916S |
rectangle 9"H x 16"W (228 x 406 mm), round 10-3/4" (273 mm |
| C-916A |
rectangle 9"H x 16"W (230 x 405 mm) rectangles, round 10-3/4" (273 mm) |
| 400M |
rectangle 10"H x 16"W (255 x 406mm), round 10-3/4" (273mm) |
| 400S |
rectangle 9"H x 16"W (230 x 405mm), round 10-3/4" (273 mm) |
| C-1321DS |
rectangle 13"H x 21"W (330 x 535 mm), round 14" (355 mm) |
| C-500S |
rectangle 14"H x 19"W (355 x 480mm), round: 14" (355mm) |
| C-500-SNC |
rectangle 14"H x 19"W (355 x 480mm), round: 14" (355mm) |
| DC-310NC II |
rectangle 12"H x 12"W (305 x 305mm), round 12" (305 mm), square 12" (305 mm) |
| C-430A |
rectangle 17"H x 17"W (430 x 430 mm), round 17" (430 mm), square 17" (430 mm) |
| MITER CUTTING |
|
| |
CUTTING CAPACITY |
| C-916S |
rectangle 9"H x 16"W (228 x 406 mm), round 10-3/4" (273 mm) |
| 400S |
rectangle 9"H x 16"W (230 x 405mm), round 10-3/4" (273 mm) |
| C-1321DS |
rectangle 13"H x 21"W (330 x 535 mm), round 14" (355 mm) |
| 500-DS |
rectangle 14"H x 20"W (355 x 508 mm), round: 15" (381 mm) |
| C-500S |
rectangle 14"H x 19"W (355 x 480 mm), round: 14" (355 mm) |
| C-500-SNC |
rectangle 14"H x 19"W (355 x 480 mm), round: 14" (355 mm) |
| TM-1822M |
rectangle - straight head 18"W x 22"H (455 x 560 mm), round - straight head 18" (455 mm) |
| TF-2025M |
rectangle 20" x 25" (510 x 635 mm), round 20" (510 mm) |
| TF-2025NC |
rectangle 20" x 25" (510 x 635 mm), round 20" (510 mm) |
| TF-2525 |
rectangle 25"H x 25"W (635 x 635 mm), round 25" (635 mm) |
| C-650S |
rectangle 25" x 30" (635 x 762 mm), round: 26" (660 mm) |
| C-1000/650S |
rectangle 26" x 39-1/2" (660 x 1,000 mm), round 26" (660 mm) |
| PRODUCTION POWER |
|
| |
CUTTING CAPACITY |
| C-305A |
rectangle 12" x 12" (305 x 305 mm), round 12" (305 mm) |
| C-305NC |
rectangle 12" x 12" (305 x 305 mm), round 12" (305 mm) |
| C-4100M |
rectangle: 14"H x 16"W (355 x 410 mm), tound: 16" (410 mm), square: 14" (355 mm) |
| C-4100A |
rectangle 14"H x 16"W (355 x 410 mm), round 16" (410 mm), square 14" (355 mm) |
| C-4100NC |
rectangle 14"H x 16"W (355 x 410 mm), round 16" (410 mm), square 14" (355 mm) |
| CP-21 |
rectangle 21"H x 21"W (530 x 530 mm), round 21" (530 mm), square 21" (530 mm) |
| CP-21A |
rectangle 21"H x 21"W (530 x 530 mm), round 21" (530 mm), square 21" (530 mm) |
| C-650M |
rectangle 25" x 25" (650 x 650 mm), round 26" (670 mm) |
| C-650NC |
rectangle 25" x 25" (650 x 650 mm), round 26" (670 mm) |
| C-820M |
rectangle 32" x 32" (820 x 820 mm), round: 32" (820 mm) |
| C-820NC |
rectangle 32" x 32" (820 x 820 mm), Round: 32" (820mm) |
| VERTICAL CONTOUR |
|
| |
TABLE SIZE |
| 2013-V |
table 26" x 26" (660 x 660 mm), tilt 45° R, 10° L |
| 2013-V3 |
table 26" x 26" (660 x 660 mm), tilt 45° R, 10° L |
| 2012-VH |
table 26-1/2" x 33-1/2" (675 x 850 mm), tilt 45° R, 10° L |
| 2613-V3 |
table 26" x 26" (660 x 660 mm), tilt 45° R, 10° L |
| 3613-1 |
table 26" x 26" (660 x 660 mm), tilt 45° R, 10° L |
| 3613-V3 |
table 26" x 26" (660 x 660 mm), tilt 45° R, 10° L |
| 3612-VH |
table 26-1/2" x 33-1/2" (675 x 850 mm), tilt 45° R, 10° L |
| ZV-3620 |
table 30" x 36" (760 x 915 mm), tilt 45° R, 5° L |
| 2012-D12 |
table: 26-1/2" x 33-1/2" (675 x 850mm) |
^ Back to Top ^
www.hydmech.com
 Innovation is what sets Hyd-Mech apart. They were the first company to introduce swing-head versatility in their scissors-style saws and they have always led the way in offering customers the widest range of saws as well as producing the heaviest machines in every class. Their teams of highly-skilled engineers, designers, and technicians are continually working on new techniques that will improve the quality, the life-span, and the ultimate performance of their saws and material handling equipment. And, it is this unequalled approach to innovative design and construction that has earned Hyd-Mech the reputation of being "The Rock Solid Solution” providers.
| H SERIES - HORIZONTAL |
|
| |
CUTTING CAPACITY (at 90°) |
| H-10A |
rectangular 10" x 10", round 10" |
| H-14A |
rectangular 14" x 14", round 14" |
| H-18A |
rectangular 18" x 18", round 18" |
| H-18A-120 |
rectangular 18" x 18", round 18" |
| H-22A |
rectangular 22" x 22", round 22" |
| H-22A-120 |
rectangular 22" x 22", round 22" |
| H-28A |
rectangular 28" x 28", round 28" |
| H-28A-120 |
rectangular 28" x 28", round 28" |
| H-32A |
rectangular 32" x 32", round 32" |
| H-26/42 |
rectangular 26" x 42", round 30" |
| H-40/40 |
rectangular 40" x 40", round 40" |
| H-40/60 |
rectangular 40" x 60", round 40" |
| H-40/80 |
rectangular 40" x 80", round 40" |
| COLD SAW SERIES - COLD SAWS |
|
| |
CUTTING CAPACITY (at 90°) |
| P225 |
rectangular hollow 2.5" x 2", square hollow 2.25", round hollow 2.5" |
| P250 |
rectangular hollow 3.5" x 1.75", square hollow 2.25", round hollow 2.5" |
| P350 |
rectangular hollow 5.125" x 3.125", square hollow 4", round hollow 4.5" |
| C350-2AV |
rectangular hollow 7" x 3.75", square hollow 3.75", round hollow 4.5" |
| C350-2S |
rectangular hollow 7" x 3.75", square hollow 3.75", round hollow 4.5" |
| C350-2CNC |
rectangular hollow 7" x 3.75", square hollow 3.75", round hollow 4.5" |
| C370-2SI |
rectangular hollow 7" x 3.75", square hollow 4.33", round hollow 4.75" |
| C370CNC |
rectangular hollow 7" x 4", square hollow 4.25", round hollow 4.75" |
| CNF400CNC |
rectangular hollow 7" x 4", square hollow 4.75", round hollow 5" |
| PNF350-2AV |
rectangular hollow 7" x 2.75", square hollow 4", round hollow 4.75" |
| PNF350-2S |
rectangular hollow 7" x 2.75", square hollow 4", round hollow 4.75" |
| PNF350-2CNC |
rectangular hollow 7" x 2.75", square hollow 4", round hollow 4.75" |
^ Back to Top ^
|
|
